Technical Specifications - Stihl RMI 632 Manuel D'utilisation

issued the following EU type examination
certificate:
RT 60122184 0001
Storage of technical documentation:
STIHL Tirol GmbH
Product approval
The year of manufacture and machine
number (serial number) are indicated on
the machine.
Langkampfen, 02.01.2019
STIHL Tirol GmbH
p.p.
Head of Design

23. Technical specifications

RMI 632.0, RMI 632.0 P,
RMI 632.0 C, RMI 632.0 PC:
Serial number 6309
Mowing system Mulching mow-
ing deck
Cutting utilities Cutter bar
Cutting width 28 cm
Speed of cutting
utilities 3150 rpm
Battery type Lithium-ion
0478 131 9942 C - EN
RMI 632.0, RMI 632.0 P,
RMI 632.0 C, RMI 632.0 PC:
Battery voltage U 29 V
DC
Cutting height 20 - 60 mm
Protection class III
Type of protection IPX4
In accordance with Directive 2006/42/EC
and the EN 50636-2-107 standard:
Measured sound
power level L 59 dB(A)
WA
Uncertainty K 3 dB(A)
WA
L + K 62 dB(A)
WA WA
Sound pressure level
L 48 dB(A)
pA
Uncertainty K 3 dB(A)
pA
Length 73 cm
Width 54 cm
Height 27 cm
RMI 632.0, RMI 632.0 C, RMI 632.0 P:
Weight 14 kg
RMI 632.0 PC:
Weight 14 kg
RMI 632.0, RMI 632.0 C:
Power 120 W
Power supply unit HLG-120H
2,9 A
Battery designation AAI 131
Battery power 130 Wh
Battery capacity 4,5 Ah
Battery weight 1,10 kg
RMI 632.0 P, RMI 632.0 PC:
Power 185 W
Power supply unit HLG-185H
4,4 A
Battery designation AAI 201
Battery power 194 Wh
RMI 632.0 P, RMI 632.0 PC:
Battery capacity 6,8 Ah
Battery weight 1,40 kg
Mobile radio:
Supported fre- E-GSM-900
quency bands DCS-1800
Radiated maximum transmitting
power:
E-GSM-900: 880 - 915 MHz:
33.0 dBm
DCS-1800: 1,710 -
1,785 MHz:
30.0 dBm
Docking station ADO 601:
Voltage U 42 V
DC
Protection class III
Type of protection IPX1
Weight 3 kg
Perimeter wire and guide loop:
Frequency range 1.0 kHz - 90 kHz
Maximum field
strength < 72 µA/m
Power supply unit:
Voltage U 100 - 240 V
AC
Frequency 50/60 Hz
Voltage U 42 V
DC
Protection class I
Type of protection IP67
Transporting STIHL batteries:
STIHL batteries meet the requirements
specified in UN manual
ST/SG/AC.10/11/Rev.5 Part III,
subsection 38.3.
163