Safety - Stihl RMI 632 Manuel D'utilisation

starting point. The default setting is 2 of 10
mowing operations (2/10) at each starting
point.
● Change the starting frequency as
required after teach-in.
● If the teach-in procedure has been
aborted prematurely, send the robotic
mower back the to docking station via a
command. ( 11.5)
● RMI 632 C, RMI 632 PC:
A radius from 3 m to 30 m around each
starting point can be defined after
teach-in. The stored starting points are
not assigned any radius as standard.
Starting points with radius:
When the mowing operation is
started at the respective starting
point, the robotic mower starts by
mowing the partial area within the
circular segment around the
starting point. Only then does it
mow the rest of the mowing area.
Setting starting point 1 to 4
manually:
Determine the distance of the
starting points from the docking
station and define the starting
frequency.
The distance corresponds to that
covered from the docking station to
the starting point in metres, measured in a
clockwise direction.
The starting frequency can be between 0
of 10 mowing operations (0/10) and 10 of
10 mowing operations (10/10).
RMI 632 C, RMI 632 PC:
A radius from 3 m to 30 m around the
starting point can be defined.
0478 131 9942 C - EN
The docking station is
defined as starting point 0;
mowing operations are
started from here as standard.
The starting frequency corresponds
to the calculated residual value of
10 of 10 operations.

11.16 Safety

1. Disabling device
2. Level
3. GPS protection (RMI 632 C,
RMI 632 PC)
4. Change PIN code
5. Start signal
6. Alarm signal
7. Menu signal
8. Child lock
9. Keylock
10.Link iMow and dock
1. Disabling device:
The disabling device is activated
with OK; the robotic mower can no
longer be operated.
The robotic mower must be disabled prior
to any maintenance or cleaning work, prior
to transportation and prior to inspection.
( 5.2)
● To deactivate the disabling
device, press the illustrated
button combination (Mow button
and OK button).
2. Level:
Four safety levels can be set;
various locks and safety devices are
activated, depending on the level.
– None:
The robotic mower is unprotected.
– Low:
The anti-theft alarm is active; a PIN
code must be entered in order to link the
robotic mower and docking station, and
to reset the machine to the default
settings.
– Medium:
As "Low", but the time lock is also
active.
– High:
As "Medium", but settings can also only
be changed following entry of the PIN
code.
Recommendation:
Set the safety level to "Low",
"Medium" or "High".
● Select the required level and confirm
with OK; enter the 4-digit PIN code if
necessary.
Anti-theft alarm:
If the mower is lifted or tilted by the handle
for longer than 10 seconds, the PIN query
appears. If the PIN code is not entered
within one minute, an alarm sounds and
automatic operation is switched off.
Connection lock:
PIN code query prior to linking of the
robotic mower and docking station.
Reset lock:
PIN code query prior to resetting the
machine to the factory defaults.
Time lock:
PIN code query for changing a setting if no
PIN code has been entered for more than
one month.
Setting protection:
PIN code query when settings are
changed.
137