Active Times; Mowing Plan - Stihl RMI 632 Manuel D'utilisation

again in the "Active times" menu. (
If the command is performed several times
in succession, the next active time is
always skipped. If no active times remain
for the current week, the message "No
mowing will take place next week"
appears.
9. Edge mowing:
Following activation, the robotic
mower mows the edge of the
mowing area. After completing
one circuit, it travels back to the docking
station and charges the battery.

11.6 Mowing plan

The stored mowing plan can be
called up via the "Mowing plan"
menu in the main menu. The
rectangular blocks beneath the respective
days represent the saved active times.
Mowing is possible in active times marked
in black. Grey blocks represent active
times without mowing operations – e.g. in
the case of a disabled active time or
following the command "Skip active time".
( 11.5)
When automatic mowing is
switched off, the entire mowing plan
is disabled and all active times are
shown in grey.
132
11.7) The Active times (
duration ( 11.8) submenus can be
selected by pressing the control pad
upwards or downwards and opened with
the OK button.
If the active times for an individual
day need to be edited, the day must
be activated via the control pad
(press to the left or right) and the Active
times submenu must be opened.

11.7 Active times

Mowing is permitted during ticked
active times; these times are
marked in black in the mowing plan.
Mowing is not permitted during
unticked active times; these times
are marked in grey in the mowing
plan.
Follow the instructions in the "Notes
on mowing – Active times" section.
( 14.3)
In particular, third parties must keep
out of the danger area during the
active times.
RMI 632 C, RMI 632 PC:
Active times can also be edited
using the app. (
11.7) or Mowing The stored active times can be individually
selected and edited.
The New active time menu item
can be selected provided fewer than
3 active times per day have been
saved. An additional active time must not
overlap with other active times.
If the robotic mower is not to mow on
the selected day, the menu item
Delete all active times should be
selected.
Editing active times:
The selected active time for
automatic mowing can be disabled
or enabled using Active time off
and Active time on respectively.
The time window can be changed
with Change active time.
If the selected active time is no
longer required, the menu item
Delete active time should be
selected.
10.)
If the time windows for the
necessary mowing and charging
operations are not sufficient, active
times must be extended or added,
or the mowing duration must be
reduced. A corresponding display
message appears.
0478 131 9942 C - EN