Environmental Protection; Removing The Battery; Transport - Stihl RMI 632 Manuel D'utilisation

Masquer les pouces Voir aussi pour RMI 632:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– damage to the machine as a result of
inadequate or incorrect cleaning,
– corrosive and other resultant damage
caused by incorrect storage,
– damage to the machine through the use
of inferior-quality spare parts,
– damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
0478 131 9942 C - EN

20. Environmental protection

The machine, its packaging and
accessories are all produced from
recyclable materials and must be disposed
of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life. Pay particular attention to the
information in the "Disposal" section
during disposal. (
6.11)
Waste products such as
batteries must always be
disposed of properly. Observe
local regulations.
Do not dispose of lithium-ion
batteries with domestic waste.
Please hand them in to a
specialist dealer or at a
hazardous waste collection
point.

20.1 Removing the battery

● Activating disabling device. (
● Set the lowest cutting height. (
● Place the robotic mower on its back.
Remove the screws (1) and remove the
cover (2).
● Remove the battery from the battery
compartment (
again and install the screws.
Risk of injury!
Prevent damage to the battery.

21. Transport

Risk of injury!
Before transporting, carefully read
the section "For your safety" (
5.2)
particularly the subsection
"Transporting the machine" (
9.6)
and follow all safety instructions –
always activate the disabling
device. (
9.5), fit the cover
6.),
6.5),
5.2)
161

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rmi 632 pRmi 632 cRmi 632 pcRmi 422 pRmi 422 pcRmi 422

Table des Matières