Publicité
ULTRAFLEX
In the case of multi-engine systems, proceed as follows:
1. Place all engines in neutral.
2. Open the bypass valve on the electro-hydraulic power
by turning it anticlockwise until it locks .
3. Move the engines to the central position and close the bypass
4. Operate the boat using the throttle/reverse control box of each engine.
WARNING
Act on the valve manually without the use of tools .
DANGER
In this mode the boat should be operated at the lowest possible speed and only to bring the boat back to the
safety zone as you have no control over the steering system.
page 34
of 119 -
INTEGRA SYSTEM
UIP POWER UNIT
UIPC POWER UNIT
UIP POWER UNIT
UIPC POWER UNIT
NEUTRAL
unit or the LTB6 remote bypass valve (if present)
LTB6 VALVE
valve.
LTB6 VALVE
User manual
Publicité
