Publicité
ULTRAFLEX
2.3 System use
On the first sailing with the INTEGRA system installed, check:
… The first sailing should be in calm sea conditions. After checking that all passengers are wearing personal
protective equipment, proceed at a moderate speed checking the response of the boat controls. Once you
have reached safe waters, carry out several manoeuvres at different speeds until you get familiar with the
steering response.
… Refer to section "1 SYSTEM DESCRIPTION" within this manual to find information regarding the position
and function of the different components of the system. The operator should have read and understood this
information before operating the boat.
… Check the steering response when turning the rudder to the PORT and STARBOARD positions.
… Check that hoses and any connecting cables are not damaged.
… Check that the mechanical components are not damaged.
… Check that
all cylinder and rudders
manoeuvre range. The movement of both cylinder and rudder should be smooth.
… Check the hydraulic oil level on all system control units.
… Check that there are no alarms/warnings on the display
-
DANGER
Non-observance of these indications may cause a loss of control and possible collisions and/or tilting of the boat
resulting in material damages and personal injury or death.
DANGER
Do not operate and use the system if any component is not in proper working condition as this could cause a loss
of control and possible collisions and/or tilting of the boat resulting in material damages and personal injury or
death.
resulting in material damages and personal injury or death.
WARNING
While the boat is moving, avoid moving from one steering station to another. Place the engine in neutral and wait
until the boat is stationary.
WARNING
Keep magnets away from the rudder and the cylinder. They may interfere with operation.
and its connections move freely and not jerkily throughout the entire
page 23
INTEGRA SYSTEM
User manual
of 119
Publicité
