Tiller Handle Installation - HONDA marine BF40D Instructions D'utilisation

TILLER HANDLE INSTALLATION

1) Turn the outboard motor either to the right or left
and set the steering handle bracket end on the
mount frame.
2) Install the two 10 mm washers and two
10 x 32 mm bolts and tighten the bolts to the
specified torque.
Torque: 34 N . m (3.5 kgf . m, 25 lbf . ft)
STEERING HANDLE
BRACKET
10 x 32 mm HEX. BOLT (2)
10 mm WASHER (2)
18