Optional Extras - BFT RIGEL 6 Instructions D'installation

Logic De nition
Con guration of
SAFE 2 safety input SAFE 2.
Con guration of
SAFE 3 safety input SAFE 3.
Con guration of
safety input SAFE 4.
SAFE 4
Con guration of
SAFE 5 safety input SAFE 4.
Con guration of
SAFE 6 safety input SAFE 6.
Con guration of
IC 1 command input IC 1.
Con guration of
command input IC 2.
IC 2
Con guration of
IC 3 command input IC 3.
Con guration of
command input IC 4.
IC 4
Con guration of the
1st radio channel
1ch
command
Con guration of the
2ch 2nd radio channel
command
Con guration of the
3 ch 3rd radio channel
command
Con guration of the
4th radio channel
4 ch
command
Con guration of
AUX 0
AUX 0 output. 20-21
Con guration of
AUX 1 AUX 1 output.
22-23
Con guration of
AUX 2 AUX 2 output.
24-25
Con guration of
AUX 3 AUX 3 output.
26-37
Type of lock.
LOCK
28-29
FIXED CODE Fixed code
46
- RIGEL 6
INSTALLATION MANUAL
Cross out
Default setting
used
3
6
4
74
5
2
6
77
7
4
8
79
9
0
79
10
11
12
6
13
84
14
0
0
1
61
2
4
3
62
4
2
5
64
3 6
65
0
0 1
2
3
4
9
5
6
7
2 8
9
10
5
11
0
6 1
2
3
3 4
5
6
1 7
8
9
10
11
0
12
13
14
15
0
0
1
0
0
1
Input con gured as Phot op test (tested photocell active during opening only).
Input con gured as Phot cl (photocell active during closing only).
Input con gured as Phot cl test (tested photocell active during closing only).
Input con gured as Bar, safety edge.
Input con gured as Bar, tested safety edge.
Input con gured as Bar 8k2 (Inactive on SAFE 3,4,5,6).
Input con gured as Bar OP, safety edge with inversion active only while opening. If while closing, the
movement stops.
Input con gured as Bar OP TEST, safety edge tested with inversion active only while opening. If while
closing, the movement stops.
Input con gured as Bar OP 8k2, safety edge with inversion active only while opening. If while closing, the
movement stops.
(Inactive on SAFE 3,4,5,6).
Input con gured as Bar CL, safety edge with inversion active only while closing. If while opening, the
movement stops.
Input con gured as Bar CL TEST, safety edge tested with inversion active only while closing. If while opening,
the movement stops.
Input con gured as Bar CL 8k2, safety edge with inversion active only while closing. If while opening, the
movement stops.
(Inactive on SAFE 3,4,5,6).
Input con gured as Start E.
Input con gured as Start I.
Input con gured as Open.
Input con gured as Close.
Input con gured as Ped.
Input con gured as Timer.
Input con gured as Timer Pedestrian.
Radio control con gured as START E.
Radio control con gured as Start I.
Radio control con gured as Open.
Radio control con gured as Close
Radio control con gured as Ped
Radio control con gured as STOP
Radio control con gured as AUX0 **
Radio control con gured as AUX1 **
Radio control con gured as AUX2 **
Radio control con gured as AUX3 **
Radio control con gured as EXPO1 **
Radio control con gured as EXPO2 **
Output con gured as monostable Radio Channel.
Output con gured as SCA (gate open light).
Output con gured as Courtesy Light command.
Output con gured as Zone Light command.
Output con gured as Stair Light
Output con gured as Alarm
Output con gured as Flashing light
Output con gured as Latch
Output con gured as Magnetic lock
Output con gured as Maintenance
Output con gured as Flashing Light and Maintenance.
Not used
Not used
Output con gured as Gate Status
Output con gured as Bistable Radio Channel
Output con gured as timed Radio Channel
Output con gured as 12V solenoid latch.
Output con gured as 12V magnetic lock.
Receiver is con gured for operation in rolling-code mode.
Fixed-Code Clones are not accepted.
Receiver is con gured for operation in xed-code mode.
Fixed-Code Clones are accepted.

Optional extras