Publicité
Les langues disponibles
Les langues disponibles
(4) Connecting the antenna terminals
AM LOOP
ANTENNA
(Supplied)
LOOP
ANT.
AM OUTDOOR
ANTENNA
• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable's plug is not of the F-type, connect using the included antenna adapter.
AM loop antenna assembly
Connect to the AM
antenna terminals.
1
2
3
Remove the vinyl tie
Bend in the reverse
and take out the
direction.
connection line.
4
a. With the
antenna on top
any stable
surface.
Mount
b. With the
antenna
attached to a
wall.
Installation hole
Mount on wall, etc.
All manuals and user guides at all-guides.com
DIRECTION OF
BROADCASTING
STATION
FM INDOOR
ANTENNA
(Supplied)
75 Ω/ohms
COAXIAL
CABLE
FM COAX. 75
AM
FM ANTENNA
L
ADAPTER
R
(Supplied)
IMPEDANCE
R
L
R
L
6 16
FRONT
CENTER
SURR
SPEAKER SYSTEMS
GROUND
Connection of AM antennas
1. Push the lever. 2. Insert the conductor.
3. Return the lever.
Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
FM antenna adopter assembly
75 Ω/ohms COAXIAL CABLE
Open the cover
SHUT
PULL
CLAMP
CLAMP
PULL
ANTENNA ADAPTER
SHUT
REMOVE
CLAMP
3C-2V
5C-2V
CLAMP
(5) Connecting to a TV with 21-pin SCART Terminal
• Use the commercially 21-pin SCART cable to connect the TV's 21-pin SCART terminal to the ADV-700's 21-pin SCART terminal
(AV1).
ADV-700
FM ANTENNA
LOOP
ANT.
AM
R
FRONT
• The audio and video signals for the function selected on the set are output.
Audio output signals
• The tuner and DVD audio playback signals and the audio signals input to the AUDIO INPUT jacks are output.
• When a Dolby Digital DVD is played, the audio signals are converted to 2-channel signals before being output. (Audio signals
are not output during DTS playback.)
• The audio output level is fixed. If you do not wish to play the sound on the connected TV, turn the TV's volume down to the
minimum.
Video output signals
• The DVD video playback signals and the video signals input to the VIDEO or S-VIDEO INPUT jacks are output.
• When playing a DVD, RGB video signals can also be output.
• The selection of the VIDEO, S-VIDEO and DVD RGB video signals is set at "AV1 VIDEO OUTPUT" system setup item. (By
default all are set to "VIDEO". See page 16.)
• Some discs contain copy prohibit signals. If such discs are
played via a VCR, the copy prohibit system may cause
disturbance in the picture.
5C-2V
S VIDEO
VIDEO
FM COAX. 75
MON.OUT
IN
IN
IN
IN
OUT
MON.OUT
TV/DBS
V.AUX
VCR
IN
OUT
IN
IN
IN
IN
OUT
IN
L
PRE OUT
R
IMPEDANCE
SUB WOOFER
CDR/
TV/DBS
V.AUX
VCR
TV/DBS
L
R
L
6 16
TAPE
CENTER
SURROUND
(OPTICAL)
SPEAKER SYSTEMS
AUDIO
DIGITAL
21-pin SCART terminal
NOTES:
• Set the "TV TYPE" in "VIDEO SETUP" in "DVD SETUP"
to comply with your TV's video format. When the TV is
PAL formated, set to PAL. (See page 42.)
ENGLISH
AV 1
IN
OUT
V.AUX
TV
7
Publicité
