Denon ADV-700 Mode D'emploi page 17

11 PLAYBACK
(1) Before Operating
c 8 1:02:46
1
DVD TONE
2
CH
2
1 2 3
ON
POWER POWER CH VCR
OFF 4 5 6
VCR POWER VCR POWER CH VOL
CLEAR 7 8 9
TV
TV POWER TV POWER CH TV/VCR SLEEP
CALL +10 0
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
(2) Loading Disc
2 Set discs in the disc tray with the labeled (printed) side facing
up.
8 cm disc guide
12 cm disc guide
Disc tray
NOTE:
• Do not move the this unit while a disc is playing. Doing so
may scratch the disc.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the OPEN/CLOSE button.
Disc tray
OPEN/CLOSE button
Power button
NOTES:
• Even when the power is in the standby mode, when the
OPEN/CLOSE button is pressed, the ADV-700's power
turns on and the disc tray operates. (Auto power on
function)
• Even if the function is set to something other than DVD,
when the OPEN/CLOSE button is pressed, the function
switches to DVD and the disc tray operates.
function select function)
• Do not strike on the button with a pencil, etc.
All manuals and user guides at all-guides.com
1 Refer to "CONNECTIONS" (pages 5 to 8) and check
that all connections are correct.
2 Turn on the power.
ON / STANDBY
Light
Press the POWER
(green)
button.
Main unit
When pressed, the power turns on and the display lights. The
sound is muted for several seconds, after which the unit
operates normally. When pressed again, the power turns off,
the standby mode is set and the display turns off.
Whenever the ON/STANDBY button is in the STANDBY state,
the apparatus is still connected on AC line voltage. Please be
sure to unplug the cord when you leave home for, say, a
vacation.
(2) Loading Discs
• Pick up the disc carefully so as not to touch the signal
surface and hold it with the labeled side facing up.
• With the disc tray fully open, set the disc in the disc tray.
• Set 12 cm discs in the outer tray guide (Figure 1), 8 cm discs
in the inner tray guide (Figure 2).
• Press the OPEN/CLOSE button. The disc is automatically
loaded.
• The disc tray can also be closed automatically to load the
disc by pressing the PLAY button.
Figure 1
Outer disc tray
12 cm disc
Figure 2
Inner disc tray
8 cm disc
NOTES:
• If a foreign object is caught in the disc tray during closing,
simply press the OPEN/CLOSE button again and the tray
will open.
(Auto • Do not press the disc tray in by hand when the power is
off. Doing so will damage it.
• Do not place foreign objects in the disc tray. Doing so will
damage it.
(3) Playback
IMPORTANT SETUP INFORMATION
This set has the following presettings: "DISC SETUP", "OSD SETUP", "VIDEO SETUP", "AUDIO SETUP", "RATINGS", and
ON
These presettings have been preset upon shipment from the factory. If you wish to change them to suit your specific purposes,
POWER POWER
refer to pages 40 to 45.
Before operating the remote control unit!
Remote control
unit • Be sure to set the DVD mode using the
remote control mode selector buttons.
(3)-3
c 8 1:02:46
1
DVD TONE
ON / STANDBY PHONES OPEN/CLOSE
DVD SURROUND AMPLIFIER ADV-700
(3)-1 (3)-2,(3)-4 (5)-1
(3)-5
1 Turn on the power.
• Press the power button, the power indicator lights
and the power turns on.
ON / STANDBY
Light
(green)
Main unit
2 Press the OPEN/CLOSE button to open the disc tray.
OPEN/CLOSE
Main unit
3 Set the disc in the disc tray.
"OTHER SETUP".
DVD
(3)-1
ON
POWER POWER
OFF
FUNCTION MASTER VOLUME VCR POWER VCR POWER
/SELECT
CLEAR
SURROUND
MODE SDB/TONE
TV POWER TV POWER
CALL
DISPLAY
STATUS TIMER/SET
MENU
(3)-6
(3)-5
(4)-1
MODE
(4)-1
BAND
4 Press the OPEN/CLOSE button.
OPEN/CLOSE
ON
POWER POWER
Remote control unit
5 Press the PLAY button.
• For many interactive DVDs and video CDs with
playback control, a menu screen appears. In this
case use the procedure in step 6 to select the
desired item.
Main unit
Interactive DVDs are DVDs including multiple angles,
stories, etc.
Example: For DVDs with
menu screens
TOP MENU
Apple
Banana
Orange Strawberry
Peach Pineapple
ENGLISH
CH
1 2
3
CH VCR
4 5 6
CH VOL
7 8 9
TV
CH TV/VCR SLEEP
+10 0
RETURN INPUT MODE SURROUND
FUNCTION
(3)- 6
ENTER
(3)- 7
VOLUME
(5)- 1
MUTE
CH SHIFT
NTSC/PAL STATUS
Main unit
Remote control unit
Example: For video CDs with
playback control
1. Opening
2. 1st movement
3. 2nd movement
4. 3rd movement
5. Ending
17