Denon ADV-700 Mode D'emploi page 28

ENGLISH
16 LISTENING TO THE RADIO
(1) Auto tuner presets
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station,
then preset it using the manual "Preset memory" operation.
1 Using the TUNER function, press
and hold the TUNING + and TUNING
– buttons of the main unit for 2
– TUNING +
seconds or longer.
• "AUTO PRESET?" and "–: NO/+:
START" will alternately appear on
the display of the main unit.
• Press the TUNING – button to cancel.
2 Use the TUNING + button to select
"START".
"SEARCH" flashes on the display and
– TUNING +
searching begins.
"COMPLETED" appears once searching
is completed.
28
All manuals and user guides at all-guides.com
c 8 1:02:46
1
DVD TONE
1,2
Main unit
Main unit
(2) Tuning
c 8 1:02:46
1
DVD TONE
2 3 1
Example: Tuning in FM/AM stations
Before operating the remote control unit!
TUNER/TV/VCR
Be sure to press the proper remote control
mode selector button to set the remote control
unit to the AV mode.
1 Turn the FUNCTION/SELECT knob of the main unit or
press the FUNCTION button of the remote control and
select "TUNER".
FUNCTION
/SELECT FUNCTION
Main unit Remote control unit
2 Select "FM" or "AM".
• The selected "FM AUTO", "FM MONO" or "AM" is
displayed.
• When using the remote control, the mode button is
used to select FM AUTO and MONO.
BAND
MODE
BAND
Main unit Remote control unit
POWER
VCR POWER
TV POWER
MENU FUNCTION
1
ENTER
2
MODE
2 VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
3
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
RDS PTY CT RT
3 Adjust the receiving frequency.
• When a
station is
received, the
TU
"TUNED" – TUNING +
indication will
light.
Main unit Remote control unit
NOTE:
A humming sound may be heard when using a TV nearby
while receiving AM programs. If this happens, move the
system as far from the TV as possible.
Auto tuning
• When one of the Tuning +/– button is pressed, the
frequency changes in steps of 50 kHz in the FM band,
9 kHz in the AM band.
• If one of the Tuning +/– button is held for over 1 second,
the frequency continues to change when the button is
released (auto tuning) and stops when a station is tuned
in.Tuning will not stop at stations whose reception is
poor.
• To stop the auto tuning function, press the Tuning +/–
button once.
FM Stereo Reception
• When a program being broadcast in "FM AUTO" is
received, the "ST" indicator lights and the program is
received in stereo.
• If reception is poor and there is much noise in the
stereo signals, press the BAND or MODE button to set
the FM MONO mode.