Denon ADV-700 Mode D'emploi page 22

ENGLISH
14 SURROUND PLAYBACK
(1) Before playing with the surround function
• Adjustments using the test tones can only be performed in
the "Auto" mode and are only valid for the Auto decode
Surround modes. The adjusted levels are automatically
stored in the memory.
POWER
VCR POWER
CLEAR 7 8 9
TV
TV POWER TV POWER CH TV/VCR SLEEP
CALL +10 0
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
2 2
ENTER
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
RDS PTY CT RT
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
1,3
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
1
Press the TEST TONE button.
T.TONE
Remote control unit
2
Test tones are output from the different speakers. Use
the channel volume adjust buttons to adjust so that the
volume of the test tones is the same for all the
speakers.
• The channel to be adjusted can be changed using the
CH.SELECT button and the ( and
buttons on the remote control unit during the
adjustments using the test tones.
Remote control unit
3
After adjusting using the test tones, adjust the channel
levels either according to the playback sources or to
suit your tastes, as described below.
T.TONE
Remote control unit
22
All manuals and user guides at all-guides.com
• Even after adjusting using the test tones, the various
channels can be adjusted using the procedure described
below to suit the program source and your preferences.
POWER
VCR POWER
CLEAR 7 8 9
TV
TV POWER TV POWER CH TV/VCR SLEEP
CALL +10 0
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
2
ENTER
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
RDS PTY CT RT
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
1
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
1
Select the speaker whose level you want to adjust.
• The channel switches as shown below each time the
button is pressed.
CH.SELECT
Remote control unit
FRONT L FRONT R
CENTER
SUBWOOFER SURROUND L SURROUND R
) cursor
2
Adjust the volume level of the selected speaker while
the channel level is displayed.
Remote control unit
(2) Auto decode surround mode settings
• The auto decode surround mode can be used for multi-channel and 2-channel stereo playback in the Dolby Digital, Dolby Pro
Logic II, and DTS surround modes, according to the input signal's format.
• Here we describe the 2-channel decode mode settings for setting whether to play 2-channel sources as such in the 2-channel
mode or in the multi-channel mode, as well as the settings for the Dolby Pro Logic II mode.
[1] 2-channel decode mode settings
• In the auto decode surround mode for the DVD, TV/DBS and V.AUX functions, you can select and set the auto stereo mode for
playing 2-channel sources in 2-channel stereo, or the Pro Logic II mode for using Dolby Pro Logic II processing to achieve multi-
channel playback.
c 8 1:02:46
1
2 DVD
POWER
VCR POWER
TV POWER
CALL +10
DISPLAY RETURN INPUT MODE SURROUND
MENU
3
ENTER
MODE
BAND
CH
TU
SUB TITLE AUDIO
RDS
PROG/DIRECT REPEAT A-B
CH.SELECT T.TONE
SETUP CDR/MD/TAPE TUNER/TV/VCR
1
With the function set to DVD, TV/DBS or V.AUX, select
the auto decode surround mode.
• "AUTO decode" is displayed, then the normal display
reappears.
SURROUND
FUNCTION
MODE
/SELECT
\
Main unit Main unit
2
Press the SURR.PARA button on the remote control
unit and select the 2-channel decode mode.
2ch DEC A-ST
This can be selected when the digital input consists
of no signal, PCM signals, Dolby Digital 2-channel
signals, as well as when the analog input is selected.
1 1
3
Select the desired 2-channel decode mode using the
( and ) cursor buttons on the remote control unit.
• The mode switches as follows each time one of the
TONE
buttons is pressed:
A-ST
0
1
(auto stereo mode)
FUNCTION
3
When making parameter settings, the display will
VOLUME
return to the regular condition several seconds after
the last button was pressed and the setting will be
MUTE
SHIFT
NTSC/PAL STATUS
completed.
MEMO
ANGLE TOP MENU
PTY CT RT
REPEAT RANDOM
SDB/TONE SURR.PARA
2
Surround parameters (1)
DVD
(2-channel decode mode)
A-ST (auto stereo) mode
• 2-channel sources are played in 2-channel stereo.
When this mode is selected in the auto decode
surround mode, DVD, BS digital and other multi-
channel sources are played as such with multiple
channels, while CDs and other 2-channel sources are
automatically played in stereo.
SURROUND
For 2-channel Dolby Digital sources decoded in Dolby
Surround,
automatically process the signals in Dolby Pro Logic II
and play them in the multi-channel mode.
PLII (Pro Logic II) mode
Remote control unit
• Even 2-channel sources undergo Dolby Pro Logic II
processing and are played in the multi-channel mode.
When this mode is selected in the auto decode
surround mode, DVD, BS digital and other multi-
channel sources are played as such with multiple
channels, and CDs and other 2-channel sources also
SURR.PARA
automatically undergo Dolby Pro Logic II processing
and are played in the multi-channel mode.
In the Dolby Pro Logic II mode, "CINEMA", "MUSIC"
or "DOLBY PL" (Pro Logic) can be selected and set.
Remote control unit
(See page 23 for setting instructions.)
NOTES:
• The 2-channel decode mode cannot be set when Dolby
Digital 5.1-channel signals or DTS signals are being input.
• The 2-channel decode mode is stored separately for the
DVD, TV/DBS and V.AUX modes. (In the Dolby Pro Logic
II mode, the "CINEMA", "MUSIC" or "DOLBY PL" (Pro
Logic) mode is also stored in the memory.)
PL
(Pro Logic II mode)
Remote control unit
identification signals are used to