Denon ADV-700 Mode D'emploi page 29

POWER
(3) Presetting FM and AM stations
VCR POWER
TV POWER
Example: Presetting FM station (currently tuned in) at preset number P03
ENTER
MODE
VOLUME
BAND
2
2
MUTE
CH SHIFT
NTSC/PAL STATUS
1,3
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
RDS PTY CT RT
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
Before operating the remote control unit!
TUNER/TV/VCR
Be sure to press the proper remote control
mode selector button to set the remote control
unit to the AV mode.
1 Tune in the broadcast station that is to be preset and
press the Memory button.
• A "P - -" indication flashes for 10 seconds.
NTSC/PAL
MEMO
Remote control unit
Presetting
• Up to 40 AM or FM stations can be preset using this procedure.
• In addition to the reception frequency, the reception mode (monaural or auto) is also preset, so check the display when
presetting stations.
• If a station is preset at a number where a station is already preset, the previous station is replaced with the new station.
• The preset memory is not cleared when the power cord is unplugged.
(4) Listening to preset stations
POWER
VCR POWER
Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)
TV POWER
MENU FUNCTION
ENTER
MODE
VOLUME
BAND
1
1
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
RDS PTY CT RT
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
All manuals and user guides at all-guides.com
2 While the "P - -" indication is flashing, use the shift
button and the channel (CH) buttons (–, +) to display the
preset number "P03".
Each press of the shift button adds 10 to the current preset
number in the range of P00 to P40.
Example:
Starting with a P13
setting, each press of
CH SHIFT
the shift button results
in the changes P13 /
P23 / P33 / P03 /
P13 /...
Remote control unit
Example:
Starting with a P00 setting, each press of the shift button
results in the changes P00 / P10 / P20 / P30 / P40 /
P10 /...
3 Press the MEMORY button while the "P03" display is
flashing.
• The "P03" display will light and presetting will be
completed.
NTSC/PAL
MEMO
Remote control unit
Before operating the remote control unit!
TUNER/TV/VCR
Be sure to press the proper remote control
mode selector button to set the remote control
unit to the AV mode.
1 Press the remote control shift button and the channel
(CH) button (–, +) and select preset number "P03".
CH SHIFT
Remote control unit
(5) RDS (Radio Data System)
RDS (works only on the FM band) is a broadcasting service which allows station to send additional information along with the regular
radio program signal.
The following three types of RDS information can be received on this unit:
2 Program Type (PTY)
PTY identifies the type of RDS program.
The program types and their displays are as follows:
NEWS News ROCK M
AFFAIRS Affairs EASY M
INFO Information LIGHT M
SPORT CLASSICS
Sports
EDUCATE OTHER M
Education
DRAMA WEATHER
Drama
CULTURE FINANCE
Culture
SCIENCE CHILDREN
Science
VARIED SOCIAL
Varied
POP M RELIGION
Pop Music
2 Traffic Program (TP)
TP identifies programs that carry traffic announcements.
This allows you to easily find out the latest traffic conditions in your area before you leaving home.
2 Radio Text (RT)
RT allows the RDS station to send text messages that appear on the display.
NOTE: The operations described below using the RDS, PTY and RT buttons will not function in areas in which there are no RDS
broadcasts.
ENGLISH
Rock Music PHONE IN Phone In
Travel &
Easy Listening TRAVEL
Touring
Light Classical LEISURE Leisure &
Hobby
Serious
JAZZ
Jazz Music
Classical
COUNTRY
Other Music Country Music
Weather &
NATION M
National Music
Meteorological
OLDIES
Finance Oldies Music
Children's
FOLK M
Folk Music
Progs
DOCUMENT
Social Affairs Documentary
Religion
29