Cleaning And Storing The Device And Cuff; Technical Specifications - Beurer BC 30 Mode D'emploi

• errors occur during the measurement:
• the pump pressure is higher than 300 mmHg:
• the batteries are almost empty
In such cases, repeat the measurement. Ensure that you
do not move or speak. If necessary, reinsert or replace
the batteries.
9. Cleaning and storing the device and
cuff
• Clean the device and cuff carefully using a slightly
damp cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff un-
der water, as this can cause liquid to enter and dama-
ge the device and cuff.
• If you store the device and cuff, do not place heavy
objects on the device and cuff. Remove the batteries.

10. Technical specifications

Model no. BC 30
Type BC 30/1
Measurement Oscillometric, non-invasive blood
method pressure measurement on the
wrist
;
Measurement
;
range
.
Display accuracy
Measurement
inaccuracy
Memory
Dimensions
Weight
Cuff size
Permissible operat-
ing conditions
Permissible storage
conditions
Power supply
27
Cuff pressure 0-300 mmHg,
systolic 50-250 mmHg,
diastolic 30-200 mmHg,
pulse 40-180 beats /minute
Systolic ± 3 mmHg,
diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Max. permissible standard devia-
tion according to clinical testing:
systolic 8 mmHg / diastolic
8 mmHg
2 x 60 memory spaces
L 70 mm x W 72 mm x
H 27.5 mm
Approximately 105 g (without
batteries, with cuff)
135 to 195 mm
+5 °C to +40 °C, 15-90 % relative
humidity (non-condensing)
-25 °C to +70 °C, ≤90 % relative
humidity, 700-1060 hPa ambient
pressure
2 x 1.5 V AAA batteries