Warranty / Service - Beurer BC 30 Mode D'emploi

Battery life For approx. 300 measurements,
depending on levels of blood
pressure and pump pressure
Classification Internal supply, IPX0, no AP or
APG, continuous operation, ap-
plication part type BF
The serial number is located on the device or in the bat-
tery compartment.
Technical information is subject to change without notifi-
cation to allow for updates.
• This unit is in line with European Standard
EN 60601-1-2 (In accordance with CISPR 11,
IEC 61000-4-2, IEC 61000-4-3 and IEC 61000-4-8)
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may
interfere with this unit.
• This device is in line with the EU Medical Devic-
es Directive 93/42/EEC, the "Medizinproduktege-
setz" (German Medical Devices Act) and the stand-
ards EN 1060-1 (non-invasive sphygmomanometers,
Part 1: General requirements), EN 1060-3 (non-inva-
sive sphygmomanometers, Part3: Supplementary re-
quirements for electro-mechanical blood pressure
measuring systems) and IEC 80601-2-30 (Medical
electrical equipment – Part 2-30: Particular require-
ments for the safety and essential performance of au-
tomated non-invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life.
• If using the device for commercial medical purposes,
it must be regularly tested for accuracy by appropria-
te means. Precise instructions for checking accuracy
may be requested from the service address.

11. Warranty / service

Further information on the guarantee and guarantee
conditions can be found in the guarantee leaflet sup-
plied.
28