WERTHER INTERNATIONAL MONOLIFT 800 Manuel D'instructions Pour L'utilisation Et L'entretien page 35

Table des Matières

Publicité

Fig.12 Abb12
Fig.13 Abb.13
MONTAGGIO
I
ATTENZIONE
DURANTE IL MONTAGGIO NON É AMMESSO
NESSUN ESTRANEO AI LAVORI
1) Posizionare la colonna nella zona prestabilita tenendo conto dello
spazio di manovra dei veicoli che dovranno salire sulle rampe ( fig.12 )
2)Sollevare la colonna in posizione verticale,usando la base come dima
forare il pavimento con una punta da calcestruzzo Ø24 per una profon-
dità di circa 200m/m (fig.13).
INSTALLATION.
I
CAUTION
DURING INSTALLATION NO AUTHORIZED PEOPLE
IS ALLOWED
1)Position the post in the area established, taking into account the clea-
rance for manoeuvring the vehicles that have to drive up the ramps
(Fig.12)
2)Lift the post into the vertical position using the base as the template;
drill the floor with a 24 Ø bit for concrete down to a depth of about 200
mm (Fig.13).
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Monolift 1200

Table des Matières