Fe Connection; Commissioning And Operation; Making Presettings - Aventics DDL Mode D'emploi

Grounding
on the bus coupler
AVENTICS | DDL | R412009417–BDL–001–AD
6.3.3

FE connection

To discharge EMC interferences, connect the FE connection (1)
O
on the bus coupler via a low-impedance line to functional
earth.
Recommended cable cross-section: 10 mm
1
Fig. 5: FE connection on the bus coupler (1)
7

Commissioning and Operation

7.1

Making presettings

The following presettings have to be made:
Setting the baud rate (DDL mode)
W
Assigning an address to the bus coupler
W
Setting the output data length for valves
W
Selecting the valve supply
W
Commissioning and Operation
2
63