Dimensions; Labeling The Module - Aventics DDL Mode D'emploi

58 AVENTICS | DDL | R412009417–BDL–001–AD
Assembly
Bus coupler
6.1.1

Dimensions

33
Fig. 3: Dimensioned drawing of the valve system
(bus coupler and valves)
Dimensions A and B depend on the valve system used.
6.2

Labeling the module

Inscribe the address provided/used for the bus coupler on
W
the bus coupler in the BTN field.
Slide-in pockets for labels to identify the push-in fittings are
located on the housing (see "Spare parts and accessories" on
page 84).
Fig. 4: Label areas on the bus coupler
A + 33
B + 33
9