I-Tech PHYSIO Notice D'utilisation page 135

REHA11-12-13-14-15 • Denervated muscle AASW (medical program)
These programs are specifically indicated for denervated muscles treatment,
in presence of a complete rupture of peripheral nerve. The specific waveform
AASW (Anti Accommodation Square Wave) produce a proper stimulation and
not painful, in this situation it's not possible to stimulate muscle through its
nerve fibres: it's necessary to stimulate directly the muscle fibres.
The impulses have a longer duration (up to of milliseconds and not
microseconds as happens in normal innervated muscle) and a lower frequency.
The stimulation frequency is adjustable 0.2/0.5/1 Hz for all programs, impulse
width can be adjusted from 50ms of REHA11 up to 250 ms of REHA15.
Press the button to set the therapy time and press CH1 and/or CH2 ▲
(up-arrow) ▼(down-arrow) buttons to adjust the value. Press OK to confirm.
button and press CH1 and/or CH2 ▲ (up-
Select the frequency pressing
arrow) ▼(down-arrow) buttons to adjust the value. Press OK to confirm.
To return to the preset values by the Manufacturer, report the therapy time
and frequency values indicated in the REHAB programs table, following the
commands described above.
ATTENTION: Program works only on CH1.
Session duration: adjustable from 1 to 60 minutes, single phase.
Position of electrodes: use 2 big size electrodes, we suggest sponges and wet
electrodes, placed at the two ends of muscle to be treated.
REHA16-17-18-19-20 • Denervated muscle triangular wave (medical
program)
These programs are specifically indicated for denervated muscles treatment,
in presence of a complete rupture of peripheral nerve. Triangular waveform is
used for a more comfortable stimulation, as an alternative to REHA11-15
programs.
The impulses have a longer duration (up to of milliseconds and not
microseconds as happens in normal innervated muscle) and a lower frequency.
The stimulation frequency is adjustable 0.2/0.5/1 Hz for all programs, impulse
width can be adjusted from 50ms of REHA16 up to 250 ms of REHA20. To set
the frequency value, follow the indication described above. To return to the
preset values by the Manufacturer, report the therapy time and frequency
values indicated in the REHAB programs table, following the commands
described above.
ATTENTION: Program active on channels 1.
Session duration: 15 minutes, single phase (but it is possible to carry out less
for several times a day).
IACER Srl 135 MNPG154-06