I-Tech PHYSIO Notice D'utilisation page 90

FREE MEMORIES (ADJUSTABLE PROGRAMS)
With I-TECH PHYSIO you can set the parameters according to your needs or
indicated by the doctor/physical therapist using the MEM programs.
Read the following instructions to adjust the parameters:
1. Select MEM by pressing MODE/ESC button. Scroll the programs using
PRG+ and PRG- buttons to display the preadjusted technical
specifications. Read the following instructions to adjust the chosen
program parameters: time, frequency and width impulse.
2. Adjust therapy
▼(decrease) CH1 or CH2 buttons by increasing and decreasing the
time value. Press SET to confirm.
3. Adjust frequency HZ, pressing ▲(increase) and ▼(decrease) CH1 or
CH2 buttons by increasing and decreasing the frequency value. Press
SET to confirm.
4. Adjust width impulse µs, pressing ▲(increase) and ▼(decrease) CH1
or CH2 buttons by increasing and decreasing the width impulse value.
5. Press OK to confirm.
6. Increase intensity current of two channels using CH1 and CH2 (▲)
buttons. The value can be adjusted with 1mA stepping. Decrease the
intensity pressing CH1 e CH2 (▼) buttons.
Stop program command: press the
restart the program press
Warning: the device automatically switches off when no button is pressed for
2 minutes to preserve battery by emitting an acoustic signal.
IACER Srl
TIME-min,
time
button to pause the treatment. To
button.
90
▲(increase)
pressing
MNPG154-06
and