I-Tech PHYSIO Notice D'utilisation page 109

There are no real limits of application for these programs, which can be
practiced until the desired result has been achieved. The first results can
usually be seen after 3/4 weeks practicing 4/5 sessions a week.
Session duration: 29 minutes.
Electrodes' positioning:
BEAUTY9: photo 20 of the Positions manual.
•
BEAUTY10: photo 21 of the Positions manual.
•
• BEAUTY11: glutei photo 19 and hips photo 23 (CH1 on one hip and
CH2 on the other) of the Positions manual.
BEAUTY12: arms photo 15 and 16 (CH1 on one arm and CH2 on the
•
other) of the Positions manual.
Intensity: enough to produce good muscle contractions during the treatment
but not enough to cause any soreness.
BEAUTY13 • Tissue elasticity (non-medical program)
It is a two-phase program, that stimulates the superficial muscle fibres. The
frequencies used facilitate the removal of substances accumulated on the
surface and improve the dynamic appearance of the skin.
Session duration: 19 minutes.
Electrodes' positioning: form a square above the area to be treated as shown
in Figure 1 (see previous paragraph).
Intensity: to be adjusted to produce "surface vibrations".
BEAUTY14 • Capillarization (non-medical program)
The capillarization program significantly increases arterial flow in the treated
area; this program is very useful for recovering after intense aerobic work
(firming up and training) and improves local microcirculation.
Session duration: 30 minutes.
Electrodes' positioning: photos 01 to 20 in the Positions manual.
Intensity: medium.
BEAUTY15 • Heaviness in legs (non-medical program)
This program is used to improve blood flow and muscle oxygenation speeding
up the elimination of lactic acid (produced after anaerobic sessions for muscle
definition), reducing soreness and the risk of contractures. Thanks to this
program the muscle treated will be ready for a new training session or
competition much more quickly.
Session duration: 25 minutes.
Electrodes' positioning: photos 01 to 20 in the Positions manual.
IACER Srl 109 MNPG154-06