Settings; Main Menu; Measurement Parameter Settings; Controller Parameter Settings - Ecolab MULTRONIC Notice Technique

7

Settings

7.1

Main menu

7.1.1

Measurement parameter settings

- Adjustment of the module specific measurement parameters
(For a more detailed description, see section 4.2 – Measurement Parameters – in the
operating manual of the relevant measurement module.)
7.1.2

Controller parameter settings

- Adjustment of the module specific controller parameters
(For a more detailed description, see section 4.3 – Measurement Parameters – in the
operating manual of the relevant measurement module.)
7.1.3

Calibration

- Module specific calibration routines
(For a more detailed description, see section 4.4 – Measurement Parameters – in the
operating manual of the relevant measurement module.)
7.1.4

Configuration

7.1.4.1 Configuration System

417101163_Multronic.doc
The main menu for the adjustment of the
Multronic is opened through operating the ↑-
key in the measurement mask.
Select System Configuration through placing
the cursor onto the selected item "system"
and operating the ENTER key.
The system configuration menu is displayed
on 2 pages.
- 57 - Rev: 5.07-08