Programming Doses; Hot Water - Nuova Simonelli Aurelia Vip Plus Mode D'emploi

• Eliminate any residues of PULICAFF from
the blind filter and press
cycle starting up key of the unit or units
where the cleaning cycle has been effected.
The letter R will remain on the display like
the key . Once the rinsing cycle of the
selected unit or units has been completed,
the display will read.
MACHINE READY

PROGRAMMING DOSES

• Press the key to access the pro-
gramming; the display will read:
PROGRAM. DOSES
• Press and the display will read:
PROGRAM. DOSES
SELECT
All the programmable keys will start to flash
on and off.
• Press the coffee key you wish to program;
the display will read:
VOLUME C.C:
Followed by the dose amount already set by
the manufacturers.
• Vary the dose, by pressing the buttons
.
• By pressing the coffee key you want to pro-
gram, delivery will be started up (in the
meantime all the other keys will turn off).
• Select the dose of delivered coffee and then
press the coffee key you want to program
again.
• The display will show the new dose amount
the rinsing which can still be changed by means of the
keys
• Going on to another selection or pressing
the key.
The set coffee key will turn off.

HOT WATER

• Press the
it lights up.
The display will read:
followed by the value already set by the
manufacturers.
Press the
hot water delivery time.
• If a new sampling is desired press the
button again.
Delivery starts. When the desired dose has
been reached press the button again
• The display will show the new dose value
set which can still be changed by pressing
the
• Press the
selection to terminate the operation.
The button will turn off.
TIMED STEAM
• Press the
lights up.
In those models provided with a temperatu-
re probe (optional) the control unit automati-
cally recognizes the presence of the
.
button and make sure that
SECONDS
keys to vary the
.
keys.
key or go on to a further
button and make sure it
probe and the display will read:
STEAM. TEMP. °C
followed by the temperature set previously
by the manufacturer.
Press the keys to vary the
temperature of the beverage you want to
heat. When the desired temperature has
been reached, the steam delivery will auto-
matically stop.
• In the standard version (without temperatu-
re probe), on pressing the
play will read:
STEAM SECONDS
followed by the amount already set by the
manufacturers.
Press the keys to vary the
steam delivery time.
• If a new sampling is desired press the
button again.
Delivery starts. When the desired dose has
been reached press the button again
• The display will show the new value set
which can still be changed by pressing the
.
• Press the key or go on to a further
selection to terminate the operation.
The button will turn off.
the dis-
.
53