Aurelia V/Esse; Aurelia Vip-V/Esse With Electronic Displays (Optional) - Nuova Simonelli Aurelia Vip Plus Mode D'emploi

Automatic On/Off PROGRAMMED
NOTE: make sure that the general switch is
always on the position "I".
The state of the machine will be shown
by the signal:
The machine will SWITCH ON at the first
programmed switch-on time (see the sec-
tion entitled PROGRAMMING at the para-
graph PROGRAMMING ON - OFF).
The control unit will perform an
auto diagnosis of all functions
and all of the selection keys
will light up.
Once the diagnosis is comple-
te, the display will read as fol-
lows:
HEATING
with the date and time. Once
the temperature of 110°C has
been the word "Heating" will
disappear to be replaced by:
MACHINE READY
NOTE: once the auto diagnosis has been com-
pleted all the keys are activated.
WARNING
In case the auto diagnosis indicates error or
malfunction, call the assistance centre; the
operator MUST NOT intervene.
The machine will SWITCH OFF at the first
time set for stopping the coffee maker (see
chapter on PROGRAMMING and paragraph
on PROGRAMMING ON – OFF).
NOTE: the machine can be switched on or off
manually as indicated in the previous
paragraph.
6.1.2

AURELIA V/ESSE

SWITCHING ON: plug the machine in and
position the main switch on "I"
The state of the machine will
be shown by the signal:
WARNING
In case the auto diagnosis indicates error or
malfunction, call the assistance centre; the
operator MUST NOT intervene.
SWITCHING OFF: press the main switch into
the "O" position to switch the
machine and the signal off.
6.1.3
AURELIA VIP-V/ESSE WITH
ELECTRONIC DISPLAYS
(OPTIONAL)
SWITCHING ON: Plug the machine in and
position the "A" switch on "I";
the machine will turn on. By
pressing the "B" switch onto
position "I" an illuminated dis-
play will turn on even when the
machine is switched off.
In case the auto diagnosis indicates error or
malfunction, call the assistance centre; the
operator MUST NOT intervene.
Fig. 22
Fig. 23
WARNING
49