Programming Key; Programming Aurelia Vip Plus; Programming Aurelia V; Automatic Cleaning Cycle - Nuova Simonelli Aurelia Vip Plus Mode D'emploi

7.
PROGRAMMING
7.1
KEY
2 1
3
4
1 LCD Display.
2
Technician/waiter key lock.
3 RESET key to turn the machine on
and off and to exit menu.
4
CURSOR key: to scroll
5
the menu and to increase
and decrease values.
6 ENTER key: to access the menu.
52
LIST OF PROGRAMMABLE FUNCTIONS
AUTO.CLEAN.CYCLE
DOSE PROGRAM.
DELIVERY COUNT
ON-OFF PROGRAM.
CUP-WARMER PRO.
DATE/TIME
GRINDING
HISTORICAL ALARM
5 6
MAINTENANCE
Fig. 28
LANGUAGE
TEMPERATURE
LIGHT ADJUST
Operation to be carried out EXCLUSI-
VELY by a Qualified Technician.
Adjustment by NON qualified techni-
cians can invalidate the guarantee.
7.2
PROGRAMMING
AURELIA VIP PLUS
To access the programming units, proceed as
follows:
NOTE: the procedure can be carried out with
the machine on.
• Insert the key marked U (see chapter
"USE") in the provided keyhole.

AUTOMATIC CLEANING CYCLE

(function also available with T visualization key)
• Press the key to access program;
the display will read:
AUTO.CLEAN.CYCLE
• Press and the display will read:
AUTO.CLEAN.CYCLE
SELECT
• The central key in each unit
to flash on and off. Insert the blind filter (fig
2 A07) into the filter-holder, add half a dose
of PULICAFF and attach the filter-holder
into the unit where you intend to carry out
the automatic cleaning cycle. Carrying out a
cleaning cycle in more than one unit at a
time is possible.
• Press the key to start the unit
automatic cleaning cycle. The display
will read:
AUTO.CLEAN.CYCLE
1L
where 1L indicates that the cleaning cycle
has been activated within the 1st unit. Once
the cycle of 15 deliveries of 5 seconds each,
with a 10-second pause between each deli-
very, has been completed the selected unit
key will begin to flash on and off again
and the display will read.
RINSE
will begin