Nuova Simonelli Aurelia Vip Plus Mode D'emploi page 62

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Manually:
• After entering in the program of the first
group, press the
keys of the first
group, keys of the first and second group
show the temperature starting from a mini-
mum value of 50°C.
• At every key has an value:
Keys
1° GROUP
2° GROUP
1 °C
2 °C
4 °C
8 °C
• Sum together the value associated to the
relevant lit key to a minimum value of 50°C
to obtain the temperature setting.
• If the key is lit, it is necessary to add the
reference value, while it is not required if the
key is not lit.
• By pressing again the
is planned and the machine came back to
the general programming.
This way of setting doesn't use the delivery
of steam.
• To escape from the program and save the
setting, press the continuos
the first group.
60
Technician:
• In this steam temperature setting is possible
to plan the offset value, from -15°C to
+15°C, to obtain the correct temperature
value.
• By pressing the
is showed the offset value setted:
the way to show is the same of the way to
show the final steam temperature.
• The keys of the first group show a value
10 °C
from 0 to 15°C,the
second group show the offset sign:
20 °C
• it is switched on the value is POSITIVE, if
the key is switched off is NEGATIVE.
-
-
Keys
1° GROUP
key the value
• By releasing the
you memorize the value and came back to
the steam temperature setting.
key of
key of the first group,
key
of
the
2° GROUP
1 °C
+ o - °C
2 °C
-
4 °C
-
8 °C
-
key of the first group,
STANDARD DOSE PROGRAMMING
• Setting predetermined values for the four
doses of the first delivery unit is not possi-
ble. To do so, you must:
• Press the first unit continuous delivery
key and keep pressing it for at least 8
seconds, until the flashing delivery keys of
the first unit turn off.
• The standard doses are illustrated in the fol-
lowing table:
40 cc 60 cc
50 cc
85 cc 9 sec. 0 sec.
NOTE: A time of 0 seconds for water and
steam give way to their continuous
functioning.
DOSE COPYING
This procedure must be carried out for each
unit individually by pressing the
nuous delivery key of the unit you desire to
copy the doses onto and keep pressing it for at
least 8 seconds, until the flashing delivery keys
turn off
c o n t i -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Aurelia vAurelia esse

Table des Matières