Cleaning The Capuccinatore (Bar At Ec); 1- Cappuccino Dispensing Unit; (Bar At Ec) - La Pavoni BAR AT ES Mode D'emploi

Engl i s h
- Secure the hopper (ref.
screws (ref. B, fig. 21).
7
D
B
F
E
fig. 21
- Open the stop slide (r ef. A, fig . 22).
- Assemble the cup heating plate, by re-connecting it to the
w ater outlet pipe (r ef. B, fig . 11), and the side panels (see
"6.21 Disassembling/assembling the cover panels")
Important
To resume normal machine operations it is necessary
to verify the correct adjustment of the grinding.
fig. 22
52
7, fig. 21) by hand-tightening the
7 . 4 7 . 4 Cleaning the CAPPUCCINATORE Cleaning the CAPPUCCINATORE
7 . 4 7 . 4 7 . 4 Cleaning the CAPPUCCINATORE Cleaning the CAPPUCCINATORE Cleaning the CAPPUCCINATORE

(BAR AT EC)

(BAR AT EC) (BAR AT EC) (BAR AT EC) (BAR AT EC)
Do not carry out any cleaning procedures on the cap-
puccino device when the machine is on standby.
Cleaning should be carried out after each use of the
CAPPUCCINATORE to avoid drying of milk residue.
All removable components must be washed and rinsed
in running water.
Important
Never wash the components in dishwashing machines.
7.4.1 7.4.1 7.4.1 Cappuccino dispensing unit Cappuccino dispensing unit Cappuccino dispensing unit
7.4.1 7.4.1 Cappuccino dispensing unit Cappuccino dispensing unit
To c lean the ca ppuccino dispensing unit components indi
dually (fig.23) the following must be removed:
- the upper casing (ref.3, fig. 23), removing it upwards;
- the froth adjusting pin (ref.2, fig.23);
- the air dif fuser (r ef.7, fig .23) fr om the ca ppuccino de vice ca-
sing, in an upwards direction;
- the cappuccino device casing (ref.8, fig.23) pulling it towards
you;
- the connection fitting (ref.9, fig.23) from the milk supply tube
to the cappuccino device casing;
- the adjustable dispensing spout (ref.4, fig.23);
- the milk supply tube (ref.6, fig.23).
3
2
7
8
9
4
A
6
fig. 23
la Pavoni
Danger
vi-