Can-C1 - Fiat TIPO 2015 Mode D'emploi

CAN-C1

The ECUs interconnected by the CAN-C1 are:
 BCM (Body Control Module)
IPC (Instrument Panel Cluster)

ORC (Occupant Restraint Control – Airbag module)

 AGSM (Automatic GearShift Module)
DCTM (Dual Clutch Transmission Module)

EPS (Electric Power Steering)

 ABS (Anti-lock Braking System Module)
DCSM (Dual Clutch Shifter Module)

PAM (Parking Aid Module)

 TCM (Automatic Transmission Control Module)
ECM (Engine Control Module)

CAN-C1 reaches the DLC multiple diagnosis connector.
The 120-ohm terminal resistors of the CAN-C1 are located in the BCM and in the ECM.
All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO -60- 0.0
REV