Fiat TIPO 2015 Mode D'emploi page 143

Systeme electrique
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 441
To remove the window movement mechanism, remove the carrier and disassemble at bench.
Inside the electric windows is a PTC element in series with their electric motors. The PTC elements
permits thermal protection in the event that the BCM continues to supply current to the motors due to
a fault. The resistance of the PTC element increases as its temperature increases, consequently
interrupting the electrical circuit.
Electronic Motor Unit Connector (Driver)
All rights reserved. The circulation and reproduction of all or part of this guide by any means is prohibited.
FIAT TIPO
Pinout
1
High Side Driver (HS19) for comfort enable
2
Positive Signal UP for RR LT Window lifter
Switch
3
Positive Signal DN for RR LT Window lifter
Switch
4
Analog Input active to Vbat/Gnd for Driver
Window UPDN from Driver Stack
5
not connected
6
not connected
7
Positive Signal UP for RR RT Window lifter
Switch
8
Positive Signal DN for RR RT Window lifter
Switch
9
not connected
10
Analog Input active to Vbat/Gnd for Passenger
UPDN Window from Driver Stack
11
Enable Command for Rear Window lifter
Switch
12
Chassis GND for Drv Window lifter Stack
-31-
0.0
REV

Publicité

Table des Matières
loading

Table des Matières