BFT PROXIMA Instructions D'utilisation Et D'installation page 17

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Contact the manufacturer or an authorised service centre and find out
whether an update is actually needed.
2) Open the programmer and, after ensuring that it is off, insert a jumper
on the JP18 connector (see Fig. 4).
3) Switch the programmer on and connect it to the PC using the appropriate
9-pin serial cable or an USB cable (optional).
4) Start the updating software supplied by the manufacturer: "PROXIMA
Update.exe" and follow the instructions.
5) At the end, switch the programmer off, remove the jumper from the JP18
connector and switch it back on. Check the software version on the
display to ascertain that programming was successfully completed.
10) FuNCTION INDEX
PROXIMA is provided with a fast menu search function. With this func-
tion, you just need to indicate the number of the menu to be displayed to
reach it without having to browse using the selection keys. The list of the
numbers referring to the menus which can be reached by means of this
function is given in table 1.
The descriptions and illustrations contained in the present manual are
not binding. The Company reserves the right to make any alterations
deemed appropriate for the technical, manufacturing and commer-
cial improvement of the product, while leaving the essential product
features unchanged, at any time and without undertaking to update
the present publication.
INSTALLATION MANUAL
www.BFTGateOpeners.com | (800) 878-7829
ENGLISH
17
PROXIMA - Ver. 02 -

Publicité

Table des Matières
loading

Table des Matières