Securing The Vehicle; Fit The Transport Lock; Laying The Standard Safety Belt On The Front Wheel; Lay The Standard Safety Belt On The Rear Wheel - Kärcher MC 250 Mode D'emploi

Note
If the vehicle is not ready for running, see Chapter 13.3

Towing the vehicle.

13.1.1Securing the vehicle

WARNING
Danger of accident
Secure the vehicle against slipping during transport.
1. Park the vehicle and prevent it from rolling away, e.g. by
activating the parking brake (travel direction selector
switch to NEUTRAL - Middle position)
2. Secure the vehicle with a wheel retainer lashing system
in accordance with valid guidelines.

13.2 Fit the transport lock

The transport is secured on the four tyres of the vehicle
with the cross belts and the standard lashing straps.
CAUTION
Risk of damage
Place the straps on the wheel as close to the centre of the
wheel as possible.
Do not touch or squeeze any cables.
Cross belts (4x)
1
Standard safety belts (4x)
2
1. Secure the vehicle on the four wheels as shown.
13.2.1Laying the standard safety belt on the front
wheel
Front wheel
1
Laying the standard safety belt
2
1. Lay the safety belt on the front wheel as shown.
2. Attach the cross belt to the standard safety belt on the
outside of the wheel.
60

13.2.2Lay the standard safety belt on the rear wheel

Rear wheel
1
Laying the standard safety belt
2
1. Lay the safety belt on the rear wheel as shown.
2. Attach a cross belt to the standard safety belt on the out-
side of the wheel.

13.2.3Lashing the vehicle down

1. Hook the safety belts in the fastening eyelets and lash
the vehicle down.
a Before lashing it down, check that the belts are cor-
rectly positioned on the wheel.
13.3 Towing the vehicle
CAUTION
Risk of damage due to incorrect towing
Only tow the vehicle at a walking pace and only until you
are out of the hazard zone of flowing traffic. Then load the
vehicle for transport.
Approach slowly and not jerkily.
Attach the tow rope or the tow bar to the towing device on-
ly.
Make sure the steering and the brake are working (only
with the engine running).
In case of engine damage, release the parking brake for
loading.
ATTENTION
Do not tow the vehicle if the engine is defective, the steer-
ing or brake is faulty.
English