Cleaning; Switching Off The Machine; Cleaning The Outside Of The Machine; Cleaning The Stainless Coffee-Holders - Nuova Simonelli AURELIA II Manuel D'instructions

Masquer les pouces Voir aussi pour AURELIA II:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

8.

CLEANING

8.1
SWITCHING OFF
THE MACHINE
Stop the machine with the three main switches,
moving them to the position 0.
8.2
CLEANING THE
OUTSIDE OF THE
MACHINE
The machine must be set to "O" power (switch
off and disconnector open) before any cleaning
operations are performed.
WARNING
It is not possible to clean the machine using
water jets or standing it in water
WARNING
Do not use solvents, chlorine-based prod-
ucts or abrasives.
66
Cleaning the work area: remove the worktop,
lifting it up from the front and sliding it out.
Remove the water collection dish underneath
and clean everything with hot water and cleans-
ers.
Cleaning the bottom: To clean all the chromi-
um-plated areas, use a soft, damp cloth.
8.3
CLEANING THE
STAINLESS COFFEE-
HOLDERS
The stainless steel showers are located under
the delivery units.
Fig. 22
NOTE: To clean proceed as follows:
the coffee-holder.
that its holes are not obstructed but
clean.
(Paragraph "CLEANING FILTERS
AND FILTER-HOLDERS")
We recommend cleaning the coffee-
holder once a week.
8.4
CLEANING THE UNIT
WITH THE AID OF
THE BLIND FILTER
The machine is set to wash the delivery group
with an automatic cleaning cycle and specific
powder detergent.
It is advisable to wash the machine at least
once a day.
8.5
CLEANING FILTERS
AND FILTER-
HOLDERS
Place two spoonfuls of special cleanser in half
a litre of hot water and immerse filter and filter-
holder (without its handle) in it leaving them to
soak for at least half an hour. Then rinse abun-
dantly with running water.
Fig. 23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Digit-t3

Table des Matières