Nuova Simonelli AURELIA II Manuel D'instructions page 57

BOILER SETPOINT (T3 version only):
The display shows:
3 3
Boiler setpoint Boiler setpoint
93 4 93.4 4 93.4 93 4 93.4
Boiler temperature
Max Max Max
Select the coffee boiler to be adjusted and con-
firm by pressing the rotary switch.
Boiler 1 example
Set value
3 3
Boiler setpoint
94.0 94 0 93.8 93.8
Boiler temperature
110.8 109.6 109.6
Instant value
Turn the rotary switch to select the required
temperature for the group; press it to confirm
the setting.
BOILER OFFSET ADJUSTMENT:
From the screen:
Boiler setpoint
93 4 93.4 4
Max
Hold down the washing key
offset and boiler temperature adjustment.
The next screen will be:
Boiler Setpoint
94.0
92.0
Use the rotary switch to select the coffee boiler
for offset adjustment and press it to proceed.
Also use the rotary switch to set the offset value
for the group and then press the switch to con-
firm.
At this point it is possible to adjust the offset of
other groups with the same procedure or select
or
Menu
This setting is reserved to qualified service
engineers.
Boiler setpoint
3 3
Boiler setpoint Boiler setpoint
93 4 93.4 93.4
Boiler temperature
Max Max
to access
Group setpoint
3 3
Group setpoint
93.8 93.8
Group temperature
92.8 92.8
.
Home
STEAM BOILER SETPOINT
The display shows:
Steam boiler setpoint
Steam boiler setpo Steam boiler setpoint
1.17 1 17
Steam boiler setpoint
0.86
Select the steam icon and confirm with the
rotary switch.
Set value
Steam boiler setpoint
Steam boiler setpoint Steam boiler setpo
1 17 1.17
Steam boiler setpoint
0.86
Instant value
Turn the rotary switch to select the required
pressure / temperature for the boiler (see the
table on the following page) and then press the
switch to confirm the setting.
:
57