Delivery Count - Nuova Simonelli AURELIA II Manuel D'instructions

ACTIVE STANDBY :
This function allows the machine to enter stand-
by mode or not, which makes it possible to
choose whether or not to switch off the machine
completely or to keep it at a set pressure (less
than working levels).
Use the rotary switch to select the following
options:
OFF: during the OFF state, the machine is
completely switched off and the display
reads "OFF"
ON 0.10 bar: during the OFF state, the
machine maintains a pressure of 0.10 bar
and the display (set to minimum brightness)
reads "LOW CONSUMPTION".
0.10 bar
ON 0.50 bar: during the OFF state, the
machine maintains a pressure of 0.50 bar
and the display (set to minimum brightness)
reads "LOW CONSUMPTION.
62
ON 0.80 bar: during the OFF state, the
machine maintains a pressure of 0.80 bar
and the display (set to minimum brightness)
reads "LOW CONSUMPTION"
Active standby
Press the rotary switch to confirm the required
option.
This operation is used with both manual switching
on/off using the button
switching on/off by programming the machine.
Active standby
If the on/off button
the three active standby states (0.10 bar, 0.50
bar, 0.80 bar), the machine will switch off com-
pletely.
If the button is pressed again, this will switch on
the machine.
7.2.6

DELIVERY COUNT

Use the rotary switch to move to the "Delivery
count" icon and press to open:
Active standby
0.50 bar
A screen will open to view the counters:
Active standby
0.80 bar
Select the delivery counter icon
press the rotary switch.
On the counter page, it is possible to view 2
tables that show the counters; to pass from one
to the other, use the rotary switch.
The first table shows the counts for the single
, and automatic
doses of each group:
, is pressed during one of
Language Language ge Dose Dose Dose Tem Temperature emperature ure u Key and display Key and display
programming prog g ramming s s setpoint setpoin t t
Energy Energy
Pour Pour
Alarms A A Alarms
saving
count count
Pour count Pour count
3 3
5 5 0 0
0 0
0 0
0 0
Continue Continue 1 0
Main Menu
y and disp and disp
settings settings
Technical Technical
settings settings
Pour count
and
0
0
0
0
0