Nuova Simonelli AURELIA II Manuel D'instructions page 65

AUTOMATIC WASH CYCLE
This function serves to carry out an automatic
wash cycle for the groups.
NOTE: It is possible to open the wash function by
pressing the wash button
Insert the blind filter in the portafilter, add half a
dose of Pulicaff and insert the portafilter into the
group to be cleaned automatically
Use the rotary switch to select the group to be
washed and press the switch:
Automatic wash. Cycle
Select group
1 1 2 2 3 3
The machine views:
Automatic wash. Cycle
Select group
1 1 2 2 3 3
Washing Washin n g ng
The cycle will start automatically for the group.
It is possible to select one of the other groups.
At the end, select
or to exit.
Menu Home
In this case, the screen will display (E.g. Wash
group 1 only):
:
°C
.
W
0.86 bar
Once the washing has been finished, the rinse
stage is requested automatically:
The washing button
it and the machine will display:
1 1
Rinse e Rinse e
Empty the blind filter of any Pulicaff residues
and re-insert the portafilter into the group.
Press the rotary switch on the group to be
rinsed, then select
°C
R
0.86 bar
Sunday 21 March 14:45
°C °C
Menu
will start to flash; press
Automatic wash. Cycle
Select group
2 2 3 3
the screen will show:
Home
Sunday 21 March 14:45
°C °C
Menu
NOTE: During the selected group wash cycle, it
is possible to deliver coffee from the
groups that have not been selected.
65