Nuova Simonelli AURELIA II Manuel D'instructions page 46

Masquer les pouces Voir aussi pour AURELIA II:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

To avoid dangerous overheating,
make sure the supply cord is fully
uncoiled.
Do not obstruct the extraction and/or
dissipator grids, especially of the
cup warmer.
The user must not replace the appli-
ance supply cord. If the cord is dam-
aged, switch off the appliance and
have a qualified technician change
the cord.
Single-phase appliances with current
above 15 A and three-phase appli-
ances sold without plugs are directly
wired to the mains power and there-
fore, it is not possible to use a plug.
If no longer using the appliance, we
recommend making it inoperative;
after removing the plug from the
mains electricity, cut the power sup-
ply cable.
CAUTION
RISK OF POLLUTION
Do not dispose of the machine in the
environment; for the disposal, con-
tact an authorized service center or
contact the manufacturer for indica-
tions.
46
CAUTION
RISK OF POLLUTION
Use the steam nozzle with care and
never place hands below the jet of
steam. Do not touch the nozzle imme-
diately after us.
CAUTION
RISK OF INTOXICATION
We remind you that before carrying
out any installation, maintenance,
unloading or adjustment operations,
the qualified operator must put on
work gloves and protective footwear.
The maximum noise disturbance
level is lower than 70db.
If the pipe connecting to the mains
water is replaced the old pipe must
never be re-used.
INFORMATION TO THE USERS
Under the senses of art. 13 of
Law Decree 25th July 2005, n.
151 "Implementation of the
Directives/ Guidelines 2002/95/
CE, 2002/96/CE and 2003/108/
Fig. 7
CE, concerning the reduction
of the use of dangerous substances in electric
and electronic equipment, as well as the dis-
posal of wastes".
The symbol of the crossed large rubbish container
that is present on the machine points out that the
product at the end of its life cycle must
Be collected separately from the other wastes.
The user for this reason will have to give the
equipment that got to its life cycle to the suitable
separate waste collection centres of electronic
and electrotechnical wastes, or to give it back to
the seller or dealer when buying a new equipment
of equivalent type, in terms of one to one. The
suitable separate waste collection for the following
sending of the disused equipment to recycling, the
dealing or handling and compatible environment
Fig. 8
disposal contributes to avoid possible negative
effects on the environment and on the people's
health and helps the recycling of the materials the
machine is composed of. The user's illegal dis-
posal of the product implies the application of
administrative fines as stated in Law Decree
n.22/1997" (article 50 and followings of the Law
Decree n.22/1997).
CAUTION

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Digit-t3

Table des Matières