Special Machine Scaling Functions; Litre Counter; Resetting Washing Cycles; Resetting Machine Parametres - Nuova Simonelli MicroBar Manuel D'instructions

8.

SPECIAL MACHINE SCALING FUNCTIONS

8.1
RESETTING THE
CLEANING FILTER

LITRE COUNTER

This function allows you to reset the total
amount of water used.
Proceed as follows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch
on (ON) and pressing down on the key:
7
until the display reads
8.2
RESETTING WASHING
CYCLES
This function makes it possible to reset the total
number of washing cycles.
Proceed as follows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch
on (ON) and pressing down on the key:
5
until the display reads
8.3
RESETTING MACHINE
PARAMETRES
This function makes it possible to remove incor-
rect functioning data and to reinstate the
Standard Programming settings (see PRESET
SETTINGS chart) .
Proceed as follows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main
switch on (ON) and simultaneously press-
ing down on the keys
ENTER
1
e RESET ;
3
until the display reads:
8.4
HANDLING MANUAL
COFFEE DELIVERY
GROUP
This function makes it possible to activate the
motor manually forming the automation of the
manual coffee delivery group. Proceed as fol-
lows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch
on (ON) and simultaneously pressing down
on the arrow keys ▲
2
until the display reads:
IMPORTANT: When the machine is switched
• Press the arrow key ▼
piston DOWNWARDS.
• Press the arrow key ▲
piston UPWARDS.
• Release and reinstate voltage using the
main switch to end the procedure.
and ▼
;
4
on, since the arrow key ▼ is
used to access this site, the
piston will automatically start
to move downwards.
4 to move the
2
to move the
59