Cleaning The Steam Nozzle; Cleaning The Drop Collecting Tray Grid; Cleaning The Water Collecting Tray; Cleaning The Water Tank - Nuova Simonelli MicroBar Manuel D'instructions

9.5
CLEANING THE
STEAM NOZZLE
Clean the steam nozzle each time it is used to
warm up drinks.
CAUTION
RISK OF BURNS OR SCALDING
If cleaned when the nozzle is still hot, avoid
touching it with bare hands.
Use a cloth dipped in hot water and/or a neutral
cleanser.
9.6
CLEANING THE DROP
COLLECTING TRAY
GRID
• Wash the grid clean with a brush and hot
water and soap.
62
9.7
CLEANING THE WATER
COLLECTING TRAY
• Clean the water collecting tray with hot
water and soap, if necessary using a brush.
NOTE: The water collecting tray can be
washed in the dishwasher.
Never use any sort of solvent.
Fig. 41
9.8
CLEANING THE WATER
TANK
Switch off the machine before filling or
removing the tank.
• Clean the water tank with hot water and
soap, if necessary using a swab
Fig. 42
NOTE:rinse carefully so that undesirable
9.9
Fig. 43
CAUTION
9.10
CAUTION
NOTE:Follow the instructions applied on the
Fig. 44
residues aren't deposited on the bottom
of the tank.
CLEANING THE GAS-
KET
• Use a small brush to clean any deposits or
coffee residues off the piston and the deliv-
ery unit site or any other areas soiled with
coffee.
CLEANING THE MILK
FOAMER
label on the inside of the front door too.
• Set the machine to the "O" energy level.
Fig. 45
Fig. 46