Transport; Packaging; Storage - Kollmorgen SERVOSTAR 600 Mode D'emploi

S600 Safety Guide | 2 English

2.2.4 Transport

Transport the SERVOSTAR 600 in accordance with IEC 61800-2 as follows:
The servo amplifiers contain electrostatically sensitive components which can be damaged
by incorrect handling. Discharge yourself before touching the servo amplifier. Avoid contact
with highly insulating materials (artificial fabrics, plastic films etc.). Place the servo amplifier
on a conductive surface.

2.2.5 Packaging

The SERVOSTAR 600 packaging consists of recyclable cardboard with inserts.

2.2.6 Storage

Store the SERVOSTAR 600 in accordance with IEC 61800-2 as follows:
42 Kollmorgen | wiki-kollmorgen.eu | December 2015
Only by qualified personnel in the manufacturer's original recyclable packaging
Avoid shocks
Temperature: –25 to +70°C, max. 20K/hr rate of change
Humidity: max. 95% relative humidity, no condensation
If the packaging is damaged, check the unit for visible damage. In this case, inform the
shipper and the manufacturer.
Dimensions:
SERVOSTAR 601-610(HxWxD): 125x415x350 mm
SERVOSTAR 614/620(HxWxD): 170x415x350 mm
SERVOSTAR 640/670(HxWxD): 410x470x490 mm
Labeling : nameplate outside at the box
Storage only in the manufacturer's original recyclable packaging
Max. stacking height SERVOSTAR 601-620: 8 cartons
Max. stacking height SERVOSTAR 640-670: 3 cartons
Storage temperature: -25 to +55°C, max. rate of change 20°C / hour
Storage humidity: 5 ... 95% relative humidity, no condensation
Storage duration: Less than 1 year without restriction.
More than 1 year: capacitors must be re-formed before setting up and operating the servo
amplifier. To do this, remove all electrical connections and apply single-phase 230V AC
for about 30 minutes to the terminals L1 / L2.