The Communication Port; The Rs232 Communication Port - SciCan AUTOCLAVE STATIM 2000S Manuel De L'utilisateur

6. The Communication Port

6.1 The RS232 Communication Port

All Statim units that do not have an internal
printer will have an RS232 communication
port that will allow you to connect to an external
printer or to a SciCan Data Logger. For printing,
you will need to purchase a recommended printer
(see list below) from your local computer or
electronics store. For data storage, you can
purchase SciCan's USB Data Logger to record
and store cycle information onto a mass storage
device (MSD) such as a USB Flash Drive or SD
memory card.
Printer Model
Epson
TM-U220D (C31C515603)
Citizen
IDP-3110-40 RF 120B
Star Micro
SP212FD42-120
Star Micro
SP216FD41-120
Star Micro
SP512MD42-R
Under normal storage conditions, a thermal document will remain legible for a minimum of 5 years.
Normal storage conditions include avoiding direct sunlight, filing in office temperatures below 25
degrees Celcius and moderate humidity (45-65% relative humidity) and not next to incompatible
materials including plastic, vinyl, hand lotion, oil, grease, alcohol-based products, carbonless paper
and carbon paper.
SciCan Data Logger
For Mass Storage Device*
* Due to a variety of software programs/viewers that can be used to view the data files stored
on a mass storage device such as a USB memory stick, we recommend the above settings.
For your Statim to communicate to a specific device, you must enable this function through the
User Setup menu. Follow the instructions in section 6.2 Installing the
SciCan Data Logger below to enable communication to either an external printer or
the SciCan Data Logger.
End Of Line Serial Port
CR/LF Bitrate
CR/LF
CR
CR
CR/LF
CR/LF
End Of Line Serial Port
CR/LF Bitrate
N/A
25
Printer
Data
Logger
Printer user °
character
9600 248 [0xF8]
9600 N/A
9600 210 [0xd2]
9600 210 [0xd2]
9600 210 [0xd2]
Printer user °
character
9600 32 [0xd2]
OR