Statim 5000S - Cassette - SciCan AUTOCLAVE STATIM 2000S Manuel De L'utilisateur

4. Instructions For Use Con't.
4.2 Statim 5000S — Using the Cassette
When removing the cassette after a cycle, exercise caution as the metal areas will be hot
and the cassette may contain hot steam.
• To open the cassette:
1. Push the carry handle
open position.
2. Put your hands on either side of the
cassette handle.
3. Insert your forefingers in the slots and
place your thumbs on the thumb pads.
4. Press down with your thumbs and
pull up with your forefingers until
the lid opens.
5. Raise the cassette lid and disengage
from the tray. Rest the lid on its
outer surface.
• To close the cassette:
1. Align the hinge tab on the lid with the
hinge slot on the tray.
2. As you begin to close the lid, the hinge
tab and slot will engage.
3. Place the carry handle into the
closed position.
• Inserting the cassette into the
Statim 5000S:
1. Hold the cassette handle in one hand
and the carry handle in the other as
shown in Figure 8.
2. Place the end of the cassette into the unit and drop the carry handle into its
closed position.
3. Gently push the cassette inward until you hear a click sound.
Never push the cassette into the Statim with force as the interior components could
be damaged.
n
into the
1
Figure 8
12
n
1
n
1