Your bike must be fitted lights which are an important safety feature. Before setting off, check that your lights are working and that your batteries have

sufficient charge. Used batteries contain metal which is harmful to the environment (Hg: mercury, CD: Cadmium, Pb: Lead): They may be taken to our shops

and disposed of correctly; do not throw them out with domestic waste. The batteries should be collected separately.

The «crossed out bin» symbol shows that this product and batteries cannot be disposed of with domestic waste. They are subject to special recycling procedures. Please dispose of

your batteries or any obsolete electronic products at an authorised recycling collection point. Recycling your electronic waste in this way will help protect the environment and your

health.

For bikes with a luggage rack weighing less than 15 kg

- a) This luggage rack is designed for a maximum load of 15 kg. It is not designed to

accommodate a child seat.

- b) Do not exceed the bike's maximum load.

- c) All nuts and bolts must be screwed tightly and checked frequently (6 - 8 Nm/20 - 27

N.ft).

- d) Any modification to the luggage-rack made by the purchaser will render these

instructions invalid.

- e) This luggage rack is not designed to pull a trailer.

- f) Warning! When the pannier is full, the bike may behave differently (particularly in

terms of steering and braking).

- g) All luggage must be firmly secured on luggage rack, in accordance with manufactu-

rer's instructions. Avoid dangling straps as they may get caught up in the back wheel.

- h) The reflectors and lights must not be hidden by luggage attached to the rear carry

rack.

- i) The load must be equally distributed on both sides of the luggage-rack.

- j) Warning : That luggage can only be safely carried on the carrier.

For bikes with a pannier weighing less than 5 kg.

- a) The pannier must be mounted at the front of the bike. The mounting brackets are attached to the fork using the wheel nut (20 - 25 Nm/66 - 82 N.ft); the pannier is fixed onto the

stem mount and base using a screw (6 - 7 Nm/17 - 23 N.ft).

- b) the pannier is designed to accommodate a maximum load of 5 kg and is not suitable for attaching a baby seat or front trailer.

- c) Do not exceed the bike's maximum load.

- d) Nuts and bolts must be tightly screwed and frequently checked.

- e) The pannier must not be modified by the customer in any way. Any modification will render these instructions invalid.

- f) Warning: when the pannier is full, the bike may behave differently (particularly in terms of steering and braking).

- g) Ensure that the entire load is contained within the pannier and that there is no risk of it obstructing the wheel or hiding the light and the reflector.

- h) Ensure that weight is uniformly distributed within the pannier.

For bikes with a luggage rack weighing less than 27 kg.

- a) This luggage rack is designed for a maximum load of 27 kg. It is not designed to