Scheppach DM460T Traduction Des Instructions D'origine page 15

Problem Possible Cause
Motor doesn't start a) No electricity
b) Defective switch, condenser
c) Defective extension cord
Work piece flatters a) Working piece becomes loose while
while working
b) Work piece is not properly centered
c) Rotational speed is too high
Tool rest or tailstock Setting the eccentric clamping
cannot be clamped
Trouble shooting
working
Help
a) Check fuse
b) Have an electrician inspect unit
c) Unplug cord, inspect and replace, if
necessary
a) Follow the instructions in the operating
manual
b) Follow the instructions in the operating
manual
c) Select a lower rotational speed
Return the hexagonal nut at the bottom
side about ½ rotation with the socket span-
ner
english 15