Displaying And Deleting Measurements - Beurer BC 85 Mode D'emploi

Blood pressure Systole
value category (in mmHg)
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)

6. Displaying and deleting measurements

User memory
The results of every successful measurement are stored to-
gether with the date and time. The oldest measurement is
overwritten in the event of more than 60 measurements.
• Select the desired user memory (
memory buttons if the device is switched off.
– To view the measurement data for user
memory , press the M1 memory but-
ton.
– To view the measurement data for
user memory , press the M2 mem-
ory button.
The average of all measurements ap-
pears on the display.
®
If Bluetooth is activated (the symbol will flash on the dis-
play), the blood pressure monitor is attempting to connect
to the app. If you press the M1 button in the meantime, the
transfer will be cancelled and the morning average will be
displayed.
Diastole
Action
(in mmHg)
regular monito-
ring by doctor
self-monitoring
< 80 self-monitoring
) using the M1 or M2
If you press the M2 button, the transfer is cancelled and the
measurement data of user memory
bol is no longer shown. The buttons are deactivated as soon as
a connection is established and the data is transferred.
Press the M1 button if you have selected user memory 1.
Press the M2 memory button if you have selected user
memory 2.
Average values
A flashes on the display.
The average value of all saved meas-
ured values in this user memory is
displayed.
• Press the relevant memory button
(M1 or M2).
AM flashes on the display.
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button
(M1 or M2).
PM flashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
26
is displayed. The sym-