Displaying And Deleting Measurements - Beurer Life BM 66/U Mode D'emploi

comfortable spot and remain there calmly; close your eyes,
breathe deeply and evenly and try to relax.
If the next measurement also shows insufficient stability,
you can repeat the measurement after another resting per-
iod. If the measurements continue to show some instabil-
ity, identify these blood pressure measurements as having
been taken when the circulatory system had not been suf-
ficiently rested.
In this case, nervousness or inner anxiety may be the cause
and this cannot be cured by brief periods of rest. Existing
cardiac arrhythmias (irregular heart beat) may also prevent
a stable blood pressure measurement from being taken.
A lack of resting blood pressure can have various causes,
such as physical or mental strain or distraction, speaking or
experiencing cardiac arrhythmias during the measurement.
In an overwhelming number of cases, the HSD diagnosis will
give a very good guide as to whether the circulatory system
is rested when taking the measurement. Certain patients
suffering from cardiac arrhythmia or chronic mental con-
ditions can remain hemodynamically unstable in the long-
term, something which persists even after repeated periods
of rest. The accuracy of the resting blood pressure results
is reduced in these users. Like any medical measurement
method, the precision of the HSD diagnosis is limited and
can lead to incorrect results in some cases. The blood pres-
sure measurements taken when the circulatory system was
at rest represent particularly reliable results.
8. Displaying and deleting measure-
ments
The results of every successful measurement are stored
together with the date and time. If there are more than
60 measurements, the oldest measurements are de-
leted.
• To access memory recall mode, the blood pressure
monitor must first be started. To do this press the
Start/stop button
• Within 3 seconds of the full-screen display appear-
ing, select the desired user memory (
M1 or M2 memory button.
– To view the measurements for user memory , press
the M1 memory button.
– To view the measurements for user
memory , press the M2 memory but-
ton.
Your last measurement will appear on the
display.
20
.
) with the