Beurer Life BM 66/U Mode D'emploi page 21

• Press the relevant memory button (M1 or M2).
If you have selected user memory1, the M1 mem-
ory button must be pressed. If you have selected
user memory2, the M2 memory button must be
pressed.
A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the relevant memory button (M1 or M2).
AM flashes on the display.
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button (M1 or M2).
PM flashes on the display.
The average value of the evening measure-
ments for the last 7 days is displayed (even-
ing: 6.00 p.m. – 8.00 p.m.).
• When the relevant memory button (M1
or M2) is pressed again, the last indi-
vidual measurement is displayed (in this
example, measurement 03).
• When the relevant memory button (M1 or M2) is
pressed again, you can view your individual meas-
urements.
• To switch the device off again, press the Start/stop
button .
You can exit the menu at any time by pressing the
Start/stop button
• To clear the memory of the relevant user memory,
you must first select a user memory.
• Start individual measurement access.
• Press and hold the M1/M2 memory buttons for
5 seconds.
All the values in the current user memory
are deleted.
21
.