Operation With Ac Adapter - Beurer Life BM 66/U Mode D'emploi

• Press and hold the Start/stop button
onds.
• Choose the desired hour format with
the M1/M2 memory buttons and con-
firm with the Start/stop button
The year flashes on the display.
• Choose the desired year with the M1/
M2 memory buttons and confirm with
the Start/stop button
The month flashes on the display.
• Choose the desired month with the M1/
M2 memory buttons and confirm with
the Start/stop button
The day flashes on the display.
• Choose the desired day with the M1/
M2 memory buttons and confirm with
the Start/stop button
If the hour format is set as 12h, the day/month dis-
play sequence is reversed.
for 5 sec-
.
.
.
.
The hour flashes on the display.
• Choose the desired hour with the M1/
M2 memory buttons and confirm with
the Start/stop button
The minute flashes on the display.
• Choose the desired minute with the M1/
M2 memory buttons and confirm with
the Start/stop button

5.4 Operation with AC Adapter

You can also operate this device with an AC Adapter.
When doing so, there must not be any batteries in the
battery compartment.
• To prevent possible damage to the device, the blood
pressure monitor must only be used with the AC
Adapter included with the unit.
• Insert the connector into the device. The AC Adapter
must only be connected to the power outlet with the
voltage specified on the rating plate of the adapter.
• Then insert the AC Adapter in the power outlet.
9
.
.