Beurer Life BM 66/U Mode D'emploi page 25

Battery life For approx. 100 measurements,
depending on the blood pressure
level and/or pump pressure
Accessories Cuff, instructions for use, 4 x 1.5 V
AAA batteries, AC Adapter, stor-
age pouch
Classification Class II, internal supply, IPX0, no
AP or APG, continuous operation,
application part type BF
Auto-shut-off 1 minute after measurement, 30 sec.
after memory checking and time ad-
justing
Technical information is subject to change without notifica-
tion to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may
interfere with this unit. More details can be requested
from the stated Customer Service address or found at
the end of the instructions for use.
• This device is in line with the EU Medical Devices Directive
93/42/EEC, the "Medizinproduktegesetz" (German
Medical Devices Act) and the standards EN 1060-1 (non-
invasive sphygmomanometers, Part 1: General require-
ments), EN 1060-3 (non-invasive sphygmomanometers,
Part 3: Supplementary requirements for electro-mechan-
ical blood pressure measuring systems) and IEC 80601-
2-30 (Medical electrical equipment – Part 2 – 30: Particular
requirements for the safety and essential performance of
automated non-invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.
25