Displaying And Deleting Measurements - Beurer BM 55 Mode D'emploi

6.4 Displaying and deleting measurements

The results of every successful measurement are
stored together with the date and time. If there are
more than 60 measurements, the oldest measure-
ments are lost.
• To access memory recall mode, the blood pressure
monitor must first be started. To do this press the
START/STOP button
• Within 3 seconds of the full-screen display appear-
ing, select the desired user memory (
the M1 or M2 memory button.
• To view the measurements for user memory ,
press the M1 memory button.
• To view the measurements for user
memory , press the M2 memory but-
ton.
Your last measurement will appear on
the display.
.
) with
8:30 10/29
• Press the relevant memory button (M1 or M2).
If you have selected user memory , the M1
memory button must be pressed.
If you have selected user memory , the M2
memory button must be pressed.
A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the relevant memory button (M1 or M2).
AM flashes on the display.
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button (M1
or M2).
PM flashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
19