Measuring Blood Pressure - Beurer BC 85 Mode D'emploi

Date
The year flashes on the display.
• Select the year using the M1/M2 memory
buttons and confirm with the START/STOP
button .
The month flashes on the display.
• Select the month using the M1/M2 memory but-
tons and confirm with the START/STOP button
.
The day flashes on the display.
• Select the day using the M1/M2 memory buttons
and confirm with the START/STOP button
If the hour format is set as 12h, the day/month dis-
play sequence is reversed.
Time
The hours flash on the display.
• Select the hour using the M1/M2 memory but-
tons and confirm with the START/STOP button
.
The minutes flash on the display.
• Select the minute with the M1/M2 memory but-
tons and confirm with the START/STOP button
.
Once all the data has been set, the device switches off au-
tomatically.
Bluetooth
The Bluetooth
• Use the M1/M2 memory buttons to choose whether au-
tomatic Bluetooth
symbol flashes) or deactivated (Bluetooth
shown) and confirm with the START/STOP button
Bluetooth

5. Measuring blood pressure

Attaching the cuff
1
.
• Expose your left wrist. Ensure that the circulation of the arm
is not hindered by tight clothing or similar.
Place the cuff on the inside of your wrist.
• Close the cuff with the hook-and-loop fastener such that
the upper edge of the device is positioned approx. 1 cm
underneath the heel of the hand.
• The cuff must be fitted tightly around the wrist, but must not
constrict.
23
®
®
symbol flashes on the display.
®
data transfer is activated (Bluetooth
®
transfers will reduce the battery life.
2
®
®
symbol is not
.
3